ZX-IRA26-6-DF250-G
Rising
Feature of Thermal Camera Module:
The thermal imager enables real-time tracking of stationary / moving targets by high-speed motion platforms such as drones in complex backgrounds.
The modified thermal imager can adapt to the image affine transformation caused by the high-speed mobility of the platform, as well as the translation, zoom, rotation, and local occlusion of the target.
With LVDS / analog video input, SDI / synchronous 422 / network port video output function, the modified product is small in size, light in weight, low in power consumption, using FPGA + ARM chip kernel architecture, the system computing speed is faster, better in real-time, easy to embed into the photoelectric pod, Intelligent High Speed Dome and other systems, has a wide range of market application prospects.
Thermal Camera Module Parameters:
Imaging Thermo Metric Index | Working Form | Non-refrigeration long wave (8μm~14μm) thermal imager |
Detector Pixel | 640×480 | |
Image Element Size | 17μm | |
Heat Loss Difference | No thermalization | |
Emission rate correction | 0.01~1 adjustable | |
NETD | ≤50mK(@25℃) | |
MRTD | ≤550mK(Feature frequency) | |
Image enhancement | DDE | |
Palette | Hot black, white hot, pseudo-color | |
Automatic inhomogeneous correction | Have (no shutter) | |
Electronic zoom | 2X、3X、4X | |
Synchronize time-to-time | Have | |
Thermometric model | Temperature bar(Pseudo color)Max、lowest、centrality、area thermometric | |
Temperature warning | 0℃~120℃ | |
Thermometric precision | ±2℃ | |
Tracking Metrics | Data Refresh Rate | 60Hz(IR)/Sony core speed(VIS) |
Output Delay Lag | <16.67ms(IP)/Sony core count backwards, frame speed of 25,40ms(VIS) | |
Tracing velocity | ±32 Pixel / Field | |
Target memory tracking | Have | |
Target size | 16x16~128x128 pixel | |
Environ Ment | Working temperature | -40℃~60℃ |
Storage temperature | -40℃~65℃ | |
Electrical Appliance Interface | Communication interface | TTL |
Video in | 7520 30pin | |
Video out | 30pin、 internet | |
Enter the video | LVDS-1080P | |
Output video | 1080P | |
Video storage | SD Card Store JPEG Pictures / H.264 Video (Factory default 32G, Max 128G) | |
Power input | DC 12V | |
Other | Weight | <155g |
Power Dissipation | ≤4.6W @25℃ |
Fault phenomenon | The Reason and its Solution |
Thermal imager can not start / power indicator light is not on | 1. The electricity meter checks if the power supply is switched on 2. Whether the voltage is too low, the access voltage should be 12V |
The display has no image | 1. Whether the serial port is open (non-serial port 1) 2. Is the Baud rate setting of the operating software correct 3. Check if the monitor video input format is 1080P |
The serial port command does not respond | 1. Check if the serial port is open (non-serial port 1 is open) 2. Check is correct |
No tracking box | 1. If the tracked object is too close or the target is not obvious, choose the target again |
Dimensions:
Company Profile:
Product Process Equipment:
1. Inner carving test platform;
2. Microscope;
3. Opto Tech aspheric processing;
4. Polishing machine;
5. Thickness Gauge;
6. Ultrasonic Cleaner;
7. Workshop;
8. Interferometer;
9. High and low tempera ture test chamber;
10. High polishing machine;
11. Optical bench;
12. Raul milling;
13. Atomic force microscope;
14. Centralinstrument;
15. Hand Grinding and Polishing Machine;
FAQ:
Q1: Can OEM or ODM be provided?
A: Yes, we provide customized services for customers. You need to provide us with some technical data, such as dimensions and markings.
Q2: Can items be printed with our own logo?
A: Yes, you only need to send us the source file of the logo.
Q3: Do you provide samples? Is it free or extra?
A: We will charge as little sample fee as possible, and sometimes we may even provide samples for free. However, you must pay us the courier fee by the following courier methods: DHL, TNT, UPS and FEDEX.
Q4: What if the item is broken?
A: Except for human error, we will replace the defect in a completely new way Within 7 days after you get our products.
Feature of Thermal Camera Module:
The thermal imager enables real-time tracking of stationary / moving targets by high-speed motion platforms such as drones in complex backgrounds.
The modified thermal imager can adapt to the image affine transformation caused by the high-speed mobility of the platform, as well as the translation, zoom, rotation, and local occlusion of the target.
With LVDS / analog video input, SDI / synchronous 422 / network port video output function, the modified product is small in size, light in weight, low in power consumption, using FPGA + ARM chip kernel architecture, the system computing speed is faster, better in real-time, easy to embed into the photoelectric pod, Intelligent High Speed Dome and other systems, has a wide range of market application prospects.
Thermal Camera Module Parameters:
Imaging Thermo Metric Index | Working Form | Non-refrigeration long wave (8μm~14μm) thermal imager |
Detector Pixel | 640×480 | |
Image Element Size | 17μm | |
Heat Loss Difference | No thermalization | |
Emission rate correction | 0.01~1 adjustable | |
NETD | ≤50mK(@25℃) | |
MRTD | ≤550mK(Feature frequency) | |
Image enhancement | DDE | |
Palette | Hot black, white hot, pseudo-color | |
Automatic inhomogeneous correction | Have (no shutter) | |
Electronic zoom | 2X、3X、4X | |
Synchronize time-to-time | Have | |
Thermometric model | Temperature bar(Pseudo color)Max、lowest、centrality、area thermometric | |
Temperature warning | 0℃~120℃ | |
Thermometric precision | ±2℃ | |
Tracking Metrics | Data Refresh Rate | 60Hz(IR)/Sony core speed(VIS) |
Output Delay Lag | <16.67ms(IP)/Sony core count backwards, frame speed of 25,40ms(VIS) | |
Tracing velocity | ±32 Pixel / Field | |
Target memory tracking | Have | |
Target size | 16x16~128x128 pixel | |
Environ Ment | Working temperature | -40℃~60℃ |
Storage temperature | -40℃~65℃ | |
Electrical Appliance Interface | Communication interface | TTL |
Video in | 7520 30pin | |
Video out | 30pin、 internet | |
Enter the video | LVDS-1080P | |
Output video | 1080P | |
Video storage | SD Card Store JPEG Pictures / H.264 Video (Factory default 32G, Max 128G) | |
Power input | DC 12V | |
Other | Weight | <155g |
Power Dissipation | ≤4.6W @25℃ |
Fault phenomenon | The Reason and its Solution |
Thermal imager can not start / power indicator light is not on | 1. The electricity meter checks if the power supply is switched on 2. Whether the voltage is too low, the access voltage should be 12V |
The display has no image | 1. Whether the serial port is open (non-serial port 1) 2. Is the Baud rate setting of the operating software correct 3. Check if the monitor video input format is 1080P |
The serial port command does not respond | 1. Check if the serial port is open (non-serial port 1 is open) 2. Check is correct |
No tracking box | 1. If the tracked object is too close or the target is not obvious, choose the target again |
Dimensions:
Company Profile:
Product Process Equipment:
1. Inner carving test platform;
2. Microscope;
3. Opto Tech aspheric processing;
4. Polishing machine;
5. Thickness Gauge;
6. Ultrasonic Cleaner;
7. Workshop;
8. Interferometer;
9. High and low tempera ture test chamber;
10. High polishing machine;
11. Optical bench;
12. Raul milling;
13. Atomic force microscope;
14. Centralinstrument;
15. Hand Grinding and Polishing Machine;
FAQ:
Q1: Can OEM or ODM be provided?
A: Yes, we provide customized services for customers. You need to provide us with some technical data, such as dimensions and markings.
Q2: Can items be printed with our own logo?
A: Yes, you only need to send us the source file of the logo.
Q3: Do you provide samples? Is it free or extra?
A: We will charge as little sample fee as possible, and sometimes we may even provide samples for free. However, you must pay us the courier fee by the following courier methods: DHL, TNT, UPS and FEDEX.
Q4: What if the item is broken?
A: Except for human error, we will replace the defect in a completely new way Within 7 days after you get our products.